Trinity Yachts 167' Tri-Deck
167’ Aluminum Motoryacht Appraised Value $7,606,375
(NEARLY 50% COMPLETED)
This luxury six stateroom Aluminum Motoryacht (designed with elevator service to all four decks) is nearly 50% complete and available for well below the actual cost to date. This is an opportunity for the right buyer. Designed with a top speed of 24 knots, under 500 GRT, and with her Bahamas draft of under 8 feet, this is a great fit for an East Coast yachting family.
In addition to the hull and superstructure, it comes with 2-MTU 16V-4000's @ 3,650 HP (full warranties in effect) each and ZF gears, 2-155kw Northern Lights generators, Dometic 50 Ton AC Chiller, Quantum zero speed stabilizers, central hydraulic system, flybridge davit, garage davit, and a long list of other inventory of parts and pieces.
Pliske Marine Surveyors has a lot of experience with Trinity yachts over the years and they completed a condition and valuation survey which is available upon request to qualified applicants.
Main Deck –
The owner’s suite is located forward and is full beam. It is followed by the commercial galley, followed by the formal dining area and main salon. Going aft there is an outdoor bar area followed by a seating area with a bench seat and lounge chairs and tables. Note - there is an elevator to all four decks on this yacht.
Bridge Deck –
Forward is a seating area ahead of the helm and a center walkway down to the bow deck which has one of the three tenders stored there. The helm station has side door exits port and starboard, it features a large raised bench seat. Aft of the helm are two cabins – the captain’s suite to port is accessed from the helm. The VIP cabin is to starboard and accessed from the hallway. The is a nice owner’s lounge aft of that small standup bar and 4 person card table to starboard and an L-shaped settee to port. There is a full entertainment system, Stepping out to the deck there is a huge dining table for 12 and finally a big lounge area with two big sofas, four lounge chairs, and cocktail tables.
Sun Deck –
Lots of room to entertain on this deck with stand up bar with four stools, a dinette for 6-7 people, an outdoor kitchen, an enclosed head to starboard, four lounge chairs, and two large forward-facing raised bench seats with tables, and a large tender mounted athwartship with davit all the way aft.
Lower Cabin Deck –
The main crew area is forward with a dinette/lounge area, two cabins forward with upper and lower berths, each with a private head. Two single berth cabins aft of that with a shared head. In the stern of the boat is the engineer’s cabin with upper and lower berth, private head, and desk area.
Guest Accommodations –
There are four full guest suites. Two are king-sized berth cabins and two are twin-berth cabins with Pullman berths as well. The engine compartment is well laid out with room to service all the equipment and systems aboard the yacht. Aft of that is the tender garage with room for a Novurania jet tender and two jet skis. The area can be modified to also serve as a beach club.
Changes to Layout –
There is still time to make some changes to the layout. While the engines and generators are already installed and most bulkheads are already in place you can still make changes at this stage of construction.
SO, WHAT’S THE UPSIDE FOR THE BUYER?
Big Savings in Time & Money –
When you look at the cost estimates to complete this yacht you’ll see savings in both time and money. It is approximately 50% complete already, and we are getting current from qualified shipyards that would like to be selected to finish the project (USA, Greece, and Turkey). We believe the final number should be at least $10 million less than starting from scratch based on what yachts in this size range are actually selling for on the open market today.
A Respected Brand –
If you are not familiar with the Trinity brand they have built over 60 totally custom megayachts over the past 18 years and you will find them cruising everywhere in the world. They have attracted owners from industry, sports, and even royalty, and over 60% of their clients at one point were repeat owners which says a lot about how much fun the design and building process was at Trinity. You can learn a lot more about the history of Trinity and see a selection of completed yachts in the attached brochure.
A Strong Presence on the Global Resale & Charter Market –
Wherever you look up the Trinity brand on the internet (Google, YouTube, Multiple Listing Systems) you will find Trinity yachts showcased. They are offered for sale by the best brokers in the world and you will see sisterships successfully chartering at premium prices in every major port, and most important for any buyer, you will see a solid resale history of Trinity yachts in both the North American and in European markets.
Modern Styling –
When you look at the exterior styling in the drawings and the renderings for this yacht it is current in today’s world and there is nothing dated about it. The construction is still at a point when you can make some changes depending on personal preference.
Speed and Performance –
This yacht has a projected top speed of 24 knots based on the proven design, and you will see Trinity sisterships of similar length that confirm it. In achieving that speed the design team managed to also deliver a hull shape that is comfortable in all sea conditions which is not always the case with fast yachts in this size range.
Contemporary Interior Design –
We have recommended the six stateroom floorplan that is included in this listing because it works well for family use but is also highly desirable in the world of charter yachts. It can obviously be modified when you meet with your design team and we have an alternate layout available for your consideration.
SUPPORT TEAM OPTIONS
One of the concerns people have when taking over any yacht project like this that has been shut down for years is who do I get to help me get the yacht finished including design work and the actual construction? We have the right answers.
Design and Engineering –
You’ll be glad to know that the original team that designed this particular yacht and the other Trinity’s as well is available to help complete the remaining drawings. Everyone who was involved in this yacht from the CEO on down wants to see this yacht successfully completed and be part of the history of Trinity. Whatever help you need you’ll find the right people are available to help you get this boat back into production as fast as possible regardless of where you decide to send the yacht for completion.
Interior Designer –
Some of the best interior design firms in the world (mention several) have worked on Trinity yachts over the years and they will make the time so create any drawings needed to complete the yacht.
Completion Options -
We have just started on identifying qualified yards that are interested in making a presentation process and we have focused on yards with proven experience in this size range that are located in areas that have the key suppliers needed to make it all happen. So far we have yards in the United States, Greece, and Turkey that are interested.
You’re talking about a project in the $20 million range so this is a huge opportunity in the refit market for the right facility. The fact that the yacht can go back into production as soon as it arrives makes it even more desirable for the right yard.
The yacht is in storage in Gulfport, Mississippi. It is secure and checked regularly. The MTU engines are serviced and under full new warranty coverage that begins when the yacht is completed. The yacht can remain in its current location as long a necessary for you to make the arrangements for completion.
The seller’s only request is that we take the time to make sure any offers received are from qualified applicants who meet the three obvious criteria – they can confirm they have the money to complete the project properly, they demonstrate a good understanding of the completion process, and they have a plan (and team) mapped out to make it a success. The owner told me that he was prepared to do everything possible on his end to make this a success for everyone involved.
One thing we can assure you, you won’t find yourself standing alone wondering how you got into this project. Some amazing people are on standby to help you!
- Make MTU
- Model 16V4000
- Fuel diesel
- Type Inboard
- Total HP7,300
- Year 2007
SYS Yacht Sales is pleased to assist you in the purchase of this vessel. This boat is centrally listed by Hargrave Yachts.
- Category Power
- Condition Used
- Hull Material Aluminum
- Make Trinity Yachts
- Model Tri-Deck
- Boat Name UNDER CONSTRUCTION
- Length Overall 167'
- Model Year 2007
- Beam 28'
- Max Draft 8'
- Fuel Tank1 x 16122|gallon
- Heads 10
- Max Speed 24 kn
- Cruising Speed 20 kn
- Builder Name Trinity Yachts
- Length 167'
- Holding Tank 1 x 300|gallon
- Fresh Water 1 x 2700|gallon
- Displacement 335 lb
- Displacement Type Half Load
- Bridge Clearance 50 ft
- Drive Type Direct