Flag of Registry: United States
MANTRA is a fine example of the Hood/Little Harbor 51 Series, boasting many unique and compelling features. The pilothouse design provides owner and guests’ protection from the elements, with unrestricted views in all directions. The cockpit is also uniquely designed to lead all sail controls to the helm for unmatched short-handed capability – seldom found on any other aft-cockpit designs. And her rare shallow draft of only 5’, combined with her proven Hood-designed low-wetted surface hull, hydrodynamic centerboard with balanced spade retractable rudder and powerful sail plan, provide exceptional performance and access to more diverse shallow cruising grounds. Lastly, the deck is designed for minimal maintenance, and the walk-in engine room makes for easier mechanical work. Her original owner has consistently maintained MANTRA to a high standard and has completed many equipment upgrades and replacements as noted herein. Having enjoyed many offshore passages and extended cruises, he is now moving on to a smaller yacht.
Beam: 15' 2"
LOD: 51' 11"
Maximum Speed (knots): 8.5
Cruise Speed (knots): 7
Fuel Type: Diesel
Hull Material: Fiberglass
Flag: United States
Fuel Tank Capacity (Gallons): 180
Fresh Water Capacity (Gallons): 300
Designer: Ted Hood
Builder: Little Harbor
MANTRA sleeps four in two private cabins, plus two in the pilothouse and two in the main salon, with two separate heads and a very open layout for comfortable cruising. The interior is finished in a combination of white Formica and varnished cherry, including solid flat-paneled locker fronts. Cabin soles are varnished teak and holly, with varnished cherry hull ceilings and fabric overhead panels.
One step down from the main cockpit, one enters the enclosed pilothouse that features seating for up to six. There is an L-shaped settee to port with fixed varnished cherry table, and a settee to starboard with built-in nav station with varnished cherry chart table forward. This unique space is comfortable, safe from the elements, climate-controlled with heat/AC, and quite airy with superb visibility in all directions. Overhead hatches, opening front windshield and numerous fixed windows provide excellent natural light and ventilation. In good conditions, the rear curtains can be opened to provide one large indoor/outdoor living space under sail or at anchor. Secondary access to the engine room is through the lift-up starboard settee.
Stepping down from the pilothouse, one finds a functional wrap-around galley to starboard with generous storage and counter space.
The guest stateroom is opposite the galley to port, featuring upper and lower berths, bureau, and hanging locker.
The guest head is adjacent to the guest cabin, with private access from the cabin or via a second door opposite the galley for convenient use as day head. There is a toilet, wash basin and wet locker. In addition, a door leads aft to the walk-in engine room for easy access to all machinery and equipment located below the pilothouse.
Forward of the galley and guest cabin is the spacious full-beam main salon that features a large oval dinette to starboard with centerline settee that includes bar storage, varnished cherry countertop and additional drawers. To port is another full-length settee with backrest that flips up to provide a second sea berth. There are (2) deck hatches, (5) opening portholes and (4) fixed Lexan hull ports. Due to the hull design, there is a surprising amount of storage space below and behind all settees. For entertainment, there is a 22” LCD TV, VCR/DVD player and a Sat radio.
The master stateroom is forward, with a V-berth configuration featuring two large berths that can be converted to a double (new mattress, 2017). The cabin is unusually large for a yacht of this size and provides exceptional storage and floor area. There are bureaus each side with numerous drawers, lockers and (2) hanging lockers. A large deck hatch and (2) opening portholes provide great light and ventilation.
There is a private ensuite head to port with toilet, wash basin, deck hatch and opening porthole. Opposite to starboard is an ensuite shower with built-in seat, deck hatch and opening porthole.
12 volt DC/110 volt AC electrical system with all tinned copper wire installed in accordance with ABYC. All wires are colored and numbered for easy identification.
The yacht's DC electrical supply is 12 volt, supplied by (4) heavy-duty AGM house batteries, with a total capacity of 800 amp-hours. Independent 200-amp hour battery for engine starting and (2) AGM batteries for bow thruster. (All batteries replaced, 2015.) House batteries are charged by a 135-amp engine alternator and the engine battery is charged by a 55-amp alternator. Alternatively, all batteries may be charged by a Xantrex 100-amp automatic battery charger/inverter run off the generator, shore power, or by the AirX Marine wind generator.
The yacht's AC electrical system is 110 volt. AC power is supplied by one 50-amp shore power inlet supplying house functions. AC power is also supplied by a 2,000 watt DC power inverter or by a 6 kW Northern Lights generator (new 2016, 22 hours)
The walk-in engine room is accessed from the aft head or from the starboard pilothouse lift-up seat. A workbench is outboard to port, with storage behind and underneath.
The hull is molded in FRP with 1" Airex foam core for added strength, impact resistance, and sound/thermal insulation. Vinylester resin is used throughout for the highest possible resistance to water osmosis. Hull is white gelcoat with gold cove, double blue boot stripe and blue bottom. Bottom stripped, with new epoxy barrier (2017).
All ballast is of pre-cast lead sections fully encapsulated by the fiberglass hull and keel. The lead is covered with approximately 3/8" solid FRP to create, in effect, a "double hull" for additional protection in case of a serious grounding.
Structural bulkheads are fiberglass with balsa core. Divisional bulkheads are built of marine-grade waterproof plywood. All structural bulkheads are bonded to the hull and deck with FRP and PVC foam spacers. Chainplates are made of 316 stainless flat bar weldments thru-bolted to reinforced FRP foundations attached to hull. The structural bulkhead forward of the owner's stateroom is watertight to act as a collision bulkhead. Rubrail is molded in with stainless steel striker.
Fuel and water tanks are built of molded FRP. All tanks are fully baffled with ample inspection ports, and the water tanks are coated with FDA-approved gelcoat to ensure good taste and low odor.
The custom rudder is retractable for access to shallow waters and can be easily raised or lowered via a simple hoist system in the cockpit. Centerboard configuration offers minimum draft of 5’ with board up and maximum draft of 11’-8” with board down.
The deck is one piece molded FRP with 3/4" Airex foam core for strength and stiffness. In areas where deck equipment is installed, core is replaced with high-density foam. Cockpit sides and coaming are solid fiberglass. Deck flange is solid glass. All deck hatch landings are molded FRP. The propane locker is molded separately and ventilated with direct drain overboard.
Deck features and equipment:
Sails: (All North)
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
"With over 30 years in the yacht sales industry, we specialize in new and used yachts for sale ranging from 30 to 200+ feet. Experience why our clients say they will never go anywhere else...Experience the SYS Difference!"
International Yacht Brokers Association- SYS Yacht Sales, Active Member - Vessel ID: 2717084